Good Quality Electrosurgical Generator With Return Electrode Monitoring - 400W Multifunctional Touch Screen Monopolar and Bipolar Electrosurgical unit – AHANVOS

HV-400 LCD Electrosurgical Generator

-Max 400W Electrosurgical Generator, with mono-polar and bipolar function.

-18 working modes: Monopolar cut and coag, bipolar cut and coag.

-Wide clinical applications, such as the general surgery, thoracic surgery, orthopedic surgery, cardiology, gynecology, urology (under water TUR), oncology, neurosurgery, etc.

- Microprocessor controlled, Large LCD touch screen display. With audible and visual indicators and errors codes during the process of outputting.

-Return Electrode Monitoring system and Power Peak System, minimizing the risk of tissue damage.

-Both hand and foot controlled.

-Separate power display and outlet socket for mono-polar cut, mono-polar coag, bipolar cut and bipolar coag, each output can be individually configured.

-The unit always remembers the last setting when it turned off. (optional)

-Remote control function. The surgeon can adjust the outputs by power control ESU pencil.

-The ESU unit can be connected with laparoscope and endoscope, etc.

-Protection against over-voltage and over-current.

-Defibrillation protected.

- Convection refrigeration without ventilator.

-Have RS-232 serial port

-Mounted on a 4 wheels cart (optional).

-Meets the requirements of international safety standards EN60601-1 and EN60601-2.

Intelligent Device System
Microprocessor controlled with a wide TFT LCD Touch Screen, clean image quality. The settings and working modes of operation are changed by touching icons on the screen, ensures the users with easy access to all functions, satisfying all the surgeries demands with safety, flexibility, reliability and convenience.
Characteristics:
Equipments are designed for conventional Electrosurgical procedures with the ability to automatically adjust, designed for various operations.
Activation:
Designed to perform cutting and coagulation during surgical procedures, output activated by handswitch or Footswitch

 REM(Return Electrode Monitoring)
Return electrode (for Monopolar) with quality monitoring system(REM).
This REM system continually monitors patient impedance levels and deactivates the generator if a fault in the patient/return electrode contact is detected, at the same time with Audible and Visual Alarms, as well as real-time dynamic display of the contact quality on the screen between the negative plate and the patient’s skin.

Automatic self-test
When switch on the machine, it will start automatically self-test routine prior to operation.

Real-time Monitoring and Instance Response System for Tissue Density
This proprietary technology delivers optimal clinical effects through continuous synchronization of current and voltage. It samples the current and voltage 450,000 times per second which enables it to respond to tissue impedance changes in less than 10 milliseconds, which ensuring the machine achieves optimum energy output levels quicker and more accurately – ensuring that only the precise voltage needed is safely delivered to each tissue type.

Monopolar Cut
-Multi Monopolar outlet, 3-pin (4mm) outlets and Laparoscopic Microphone head (4mm, 8mm ) outlet
-Different effects for cutting modes , pure cut for fast tissue dissection, while blend cut with a slight coagulation effect
Two Pencils Work Simultaneously
It can meet the special surgeries like Heart bypass operation and etc, which ensures two users can operate respectively without interference.
Monopolar Coagulation
-Different coagulation modes provides precise, moderate, enhanced, contact-less coagulation effects
-Possibility of argon plasma coagulation
Bipolar
-Cut with different levels of haemostasis, urological cutting and etc
-Coagulation with Forceps for contact coagulation without sparking

TURP Functions
Both workable under Monopolar and Bipolar operating modes
This mode is used in under water environment for surgery especial Resectoscopy, which removes the tissue in the prostate with kinetic plasma under saline liquid.

Overview :

HV-400 LCD electrosurgical generator combines versatility and safety, for all general electrosurgical procedures such as cutting and coagulation in clinics, offices and emergency rooms.

Technical Specification sheet